Conference room signal suppressor should select a built-in antenna

In order to avoid interference from other factors during the meeting, and to avoid the content of the meeting being filtered, the use of conference room signal protection equipment is a correct choice.

Conference room signal suppressors suitable for use in conference rooms are mainly divided into internal antennas and external antennas on the market.

Therefore, the conference room signal suppressor can choose between a built-in antenna or an external antenna.

For smaller conference rooms, you can choose a conference room signal shield with an external antenna. The price of such external antenna shielding is usually relatively low.

Let's put quality and craftsmanship aside. Some shield conference rooms with external antenna signals and even tools are antennas of different wavelengths,

which will definitely affect the appearance, cooling fans, insulators outside the conference room exposed signals, there will definitely be noise, affecting the order of the conference room.

A conference room signal shielding device with a built-in antenna cannot see the antenna from the outside at all, achieving a uniform appearance,

and the built-in antenna is also a form of protection for the antenna. If the external antenna needs to be transferred, it will cause an unexpected shock,

and it is easy to bring the antenna down, making the machine unusable, and continued use will cause the signal suppression module inside the conference room to burn.

If you need to transfer the signal protection device with the built-in antenna out of the conference room, you can grab the handle directly from the slot on the back of the machine,

which is an easy and convenient way. Even if it is a slight impact, the internal antenna will not fall down, thus ensuring the normal use of the signal protection device in the conference room.

In short, when buying conference room signal protection equipment, it is recommended to choose a shielding device with a built-in antenna.